Author Topic: G3 flats  (Read 7157 times)

Offline goober

  • Sr. Member
  • ****
  • Posts: 1635
    • goober on heatware
G3 flats
« on: November 06, 2007, 10:41:46 PM »
just in case someone here hasn't heard the news yet on other gunsmithing sites.... there are G3 flats available from several vendors (Ohio Rapid Fire has sold out, but Copes still has 'em) for $70! there are numerous threads w/ discussions of bending methods and such on weaponeer, gunco, etc.
heatware username: goober

Offline nitegunner

  • Newbie
  • *
  • Posts: 1
Re: G3 flats
« Reply #1 on: December 09, 2007, 05:30:08 PM »
On Weaponeer.net I have a tutorial under cetme flats thread on bending without special tools or jigs.  :)

Here's the link  http://www.weaponeer.net/forum/forum_posts.asp?TID=5794&PN=1&TPN=1
« Last Edit: December 10, 2007, 04:18:19 PM by nitegunner »

Offline goober

  • Sr. Member
  • ****
  • Posts: 1635
    • goober on heatware
Re: G3 flats
« Reply #2 on: December 09, 2007, 07:13:33 PM »
that's what i'm talkin' about!  ;D
(actually i dunno if i saw yours yet. PBB's for sure, maybe yours too. i'll check again.)
heatware username: goober

Offline rich

  • Newbie
  • *
  • Posts: 33
    • Thompson Machine
Re: G3 flats
« Reply #3 on: February 15, 2008, 05:14:16 AM »
just take your time, easy to bend with patience

Offline eightball

  • Newbie
  • *
  • Posts: 7
Re: G3 flats
« Reply #4 on: January 10, 2009, 12:27:25 AM »
Yeah I know this is an old thread but has ANYONE found any templates/blueprints for these G3 flats?  Or could any of you make one from a flat you purchased?  I'm interested in making a few receivers but $70+ is a lot to lose for one screw up making one.  Thanks a lot guys.

Offline grturner

  • Newbie
  • *
  • Posts: 2
Re: G3 flats
« Reply #5 on: November 21, 2009, 11:36:58 AM »
just an update ohio rapid fire is having a sale atm for the flats at 40 a piece