Yugo milled receiver

[mcnee229]

I'm looking for prints or solid models (preferably IGES or CATIA) for an M70 receiver. I've found all sorts of stamped prints, but no milled AK style receivers. Anyone have a model or a print, or physical example they could make a print of? I would be more than glad to share any models and mastercam files I generate, just need some where to start.

Thanks!

Scott

[deth502]

line forms behind me!!

ive been looking for over a yr now. they are quite elusive!!

[Munchies]

Why not just get repair plates like everyone else. Seems kind of pointless since the trunnions are part of the receiver, and would make it a giant PITA

[mcnee229]

Because I can't machine a receiver from a reweld plate.

Scott

[toolmaster]

Looking for Milled receiver blueprints also...


If any one needs solid carbide cutting just let me know..I have 2 cnc tool grinders that is what I do for living.


Thanks

[guneng]

This is great to know! 

[j_blankenship]

What's your pricing like, and where are you at? I get 3/8 to 1-1/4" enmills of all varieties routinely and can use a good source, my current local grinder does a so-so job. I only regrind endmills though, I have my own drill and reamer grinder (this made my pricing higher with the local guy for some reason). Also, do you have a source for recoating?

Rgds,
John

If any one needs solid carbide cutting just let me know..I have 2 cnc tool grinders that is what I do for living.

Thanks

[toolmaster]

I do the following tools plus specials

carbide endmills

 carbide roughers

carbide thread mills

call me @ 615 427 8915

located in Tennessee

I have making tools since 1985

Thanks
Ron

[j_blankenship]

Ron,

I was looking for something more like:

1/2 dia 4 flute variable helix endmill (2 flutes out of phase by 5-10 deg's) - 1" LOC, regrind OD (straightness w/in .0005) and end for $??.00 each.
5/8 dia 4 flute standard helix endmill w/ .06" corner radius - 1.25" LOC, regrind OD (straightness w/in .0005), corner radius, and end for $??.00 each.

Can you list a couple of baseline example for me to judge your cost structure....?

John

[toolmaster]

1/2" endmills vari flute type regrind 12.00ea

5/8" standard helix carbide endmills with rad or without regrind 15.00 ea

1/2" standard helix carbide endmills   regrind  8.00ea

1/2" carbide roughers regrind  8.00ea

I make a type of Vari-helix carbide endmills new also

All tools are ground the latest cnc tool grinders
Just let me know

Thanks

[j_blankenship]

Thanks, that is what I was looking for. I'll give you a call Monday or Tuesday to discuss my next batch I'll be sending out.

Regards,
John