Author Topic: Rock Chucker Primer Catcher  (Read 2948 times)

Offline Johnny_V

  • Full Member
  • ***
  • Posts: 233
Rock Chucker Primer Catcher
« on: September 18, 2013, 04:47:40 PM »
Since there is not a "Reloading" forum here, thought I'd throw this into the "Your Firearms Project" forum, since most of us reload and this is Firearms related. If you think this should be moved, please do so....

For anyone using the RCBS RC-IV press, you have got to be frustrated with how RCBS designed the primer catcher - Stupid..... I was so PO'd over their design, I had to once again, reinvent the wheel. My solution was to make a new primer catcher, that would not only catch each and every primer, but to also be able to do a thousand case lot without removing the primer bin. You can view a video of my latest creation here. Let me know your thoughts.....
Johnny_V
NRA Endowment Life Member
Member OGCA & GOA
CCW OH & PA

Offline FUBob

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1023
    • FirearmFiles
Re: Rock Chucker Primer Catcher
« Reply #1 on: September 22, 2013, 03:32:17 PM »
Johnny_V,


There is a reloading forum but it is a bit hidden, was just 'AR45 Specific' and then 'Other Calibers'.  I changed 'Other Calibers' to 'General Reloading' and will move your post to it :) .


Have a good one,
FUBob