sofmatchstaff
Newbie
 Offline
Posts: 1
|
 |
« Reply #1 on: July 31, 2009, 05:24:49 PM » |
|
Have you had any luck contacting them in oregon? I tried a couple of times with no joy, so I built my own. Just curious, I thought I might get brass, instead of making the stuff myself. The finished unit is an accuate piece and have had no issues of any kind..
Used a Pac Nor bbl and a AK bolt in a heavy target upper, side cocker, floater forend with a carbine length gas system on a std rifle lower. I throated the bbl so the OAL of the round is a lot longer than the std 50AE, helped the feed geometry some to. I think the next mod is gonna be a brake!! Still fussing with the buffer weights, Just to damn hot on the range to enjoy it. (Vegas)
Kind of an interesting site, No cnc stuff, just my MK1 eyeball and elbows. I've built a bunch of stuff over the years, AR-7 kits, Hi Std bbls and carbine kits, AK mag AR lowers and upper mods, Quick change(relativley) bbls for the MP5s, and a bunch of 9mm bbls for the Oly subguns we run on the range. Finally gave up on them and went to the colts style. got work waiting, have a good one.
|
