Author Topic: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---  (Read 36084 times)

Offline hubel585

  • Full Member
  • ***
  • Posts: 141
Re: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---
« Reply #100 on: October 09, 2017, 01:03:51 PM »
A 585 HE ...shot  with moderate heavy load......

https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4


Here is a 375 HE target gun  set up, by Asteroid Precision...




Here is video of it being tested... And with a 350gr bullet about 3450-3475,

bolt opened easily with one finger...And he's  just getting started

and is checking on  better powder, Ed..



https://www.facebook.com/AsteroidPrecision/videos/298031133934093/?fref=gs&dti=321360231548869&hc_location=group
   

Offline hubel585

  • Full Member
  • ***
  • Posts: 141
Re: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---
« Reply #101 on: January 10, 2018, 01:28:12 AM »
Here in picture of the cases, are shown the steps in making

our 416 HSM case, from BMG brass,, Ed




We might have a company that is doing a bolt gun with an action

between BMG size and longer rifle actions used for 375 HE,

375 Lethal, and Cheytacs.. To use for our  416 HSM without

having to do extreme rebating of the rim.


Here is picture of 620 hsm cases half done. Done on cnc ,

that slimmed them down, cut new rim and extractor groove.

There are over 500 more at cnc getting done now, plus we  have

1000s more bmg cases we make them from, when needed..

This case is public domain and if anyone wants to make

them we can give the steps involved...Ed.