Recent Posts

Pages: [1] 2 3 ... 10
1
Your Firearm Projects / Re: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---
« Last post by hubel585 on January 10, 2018, 01:28:12 AM »
Here in picture of the cases, are shown the steps in making

our 416 HSM case, from BMG brass,, Ed




We might have a company that is doing a bolt gun with an action

between BMG size and longer rifle actions used for 375 HE,

375 Lethal, and Cheytacs.. To use for our  416 HSM without

having to do extreme rebating of the rim.


Here is picture of 620 hsm cases half done. Done on cnc ,

that slimmed them down, cut new rim and extractor groove.

There are over 500 more at cnc getting done now, plus we  have

1000s more bmg cases we make them from, when needed..

This case is public domain and if anyone wants to make

them we can give the steps involved...Ed.

2
General Discussion / Re: 585 HE -- Cases In Production --
« Last post by hubel585 on January 10, 2018, 01:26:04 AM »
Here in picture of the cases, are shown the steps in making

our 416 HSM case, from BMG brass,, Ed




We might have a company that is doing a bolt gun with an action

between BMG size and longer rifle actions used for 375 HE,

375 Lethal, and Cheytacs.. To use for our  416 HSM without

having to do extreme rebating of the rim.


Here is picture of 620 hsm cases half done. Done on cnc ,

that slimmed them down, cut new rim and extractor groove.

There are over 500 more at cnc getting done now, plus we  have

1000s more bmg cases we make them from, when needed..

This case is public domain and if anyone wants to make

them we can give the steps involved...Ed.

3
Tango Chaser Tactical LLC / Tango Chaser Tactical, LLC Closed for now
« Last post by Tango Chaser on October 15, 2017, 07:43:50 PM »
I have ceased operations as Tango Chaser Tactical, LLC. I'll be back soon with another adventure.
4
General Discussion / Re: 585 HE -- Cases In Production --
« Last post by hubel585 on October 09, 2017, 01:05:00 PM »
A 585 HE ...shot  with moderate heavy load......

https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4


Here is a 375 HE target gun  set up, by Asteroid Precision...




Here is video of it being tested... And with a 350gr bullet about 3450-3475,

bolt opened easily with one finger...And he's  just getting started

and is checking on  better powder, Ed..



https://www.facebook.com/AsteroidPrecision/videos/298031133934093/?fref=gs&dti=321360231548869&hc_location=group
   
5
Your Firearm Projects / Re: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---
« Last post by hubel585 on October 09, 2017, 01:03:51 PM »
A 585 HE ...shot  with moderate heavy load......

https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4


Here is a 375 HE target gun  set up, by Asteroid Precision...




Here is video of it being tested... And with a 350gr bullet about 3450-3475,

bolt opened easily with one finger...And he's  just getting started

and is checking on  better powder, Ed..



https://www.facebook.com/AsteroidPrecision/videos/298031133934093/?fref=gs&dti=321360231548869&hc_location=group
   
6
Does anyone know if DPMS LR-308 raw uppers and lowers are available.  The thread is a little dated.  Looking for Upper raw forgings-more specifically.  Thanks for your time Hamlin6439
7
General Discussion / Re: 585 HE -- Cases In Production --
« Last post by hubel585 on September 04, 2017, 07:58:26 PM »
Thanks

Here is case measurements for our 416 HE target case
made by necking our 585 HE big belted case.




Here is picture of 375 HE left,  416 HE next,  416 HSM on the right..




Here, tentative specs,  416 HSM case we are doing from bmg brass,





A  375  HE,  with Lawton action, few are being done with those,Ed .....


8
Your Firearm Projects / Re: 12ga,10ga,8ga,4ga FH; 585HE/700HE; Big Bores---
« Last post by hubel585 on September 04, 2017, 07:56:21 PM »
Here is case measurements for our 416 HE target case
made by necking our 585 HE big belted case.




Here is picture of 375 HE left,  416 HE next,  416 HSM on the right..




Here, tentative specs,  416 HSM case we are doing from bmg brass,





A  375  HE,  with Lawton action, few are being done with those,Ed .....


9
AR45 Discussions / Re: Fitting a blow back bolt ejector to a lower
« Last post by Mad Machinist on August 16, 2017, 04:06:23 PM »
Colt pattern blowback upper isn't compatible with a CNC AR45 lower. Mag sits too low in the magwell and no where to put a feed ramp.....I DO have something in the works as far as blowback....just short handed and not enough machines...... ;) we are working on it.... However the DI45 runs exceptionally well .... www.maconarmory.com
10
Pistol Discussions / Re: How to get beretta 92fs blueprint?
« Last post by FUBob on August 12, 2017, 10:23:02 PM »
The frame is available in the downloads section of the main site - under Solid Model *.igs files, I have attached it to this post for you.
Hope this helps.
FUBob


Edit:  Can somebody recommend a .igs file viewer that allows you to get dimensions from please?
Thanks
Pages: [1] 2 3 ... 10